How To Install: TraffiCalm Smart Radar Detector

How To Install: TraffiCalm Smart Radar Detector


Overview
TraffiCalm® manufactures its own rugged Smart Radar Detector as a cost-effective option to add to Flashing Sign Systems, making the LED flashers on the signs “vehicle activated.” This reduces power consumption and increases impact by activating the flashers only when a vehicle approaches, eliminating unnecessary flashing when no cars are passing.

Applicable Models:

  • M75-SA300-RDRO

Installation Guide

Step 1: Planning

  • Clear View: Ensure the radar has a clear, unobstructed view of the roadway.
  • Avoid Obstructions: Place the radar away from large signs or objects that could block its view.
  • Radar Aim: Ensure the radar can rotate on its bracket’s axes for optimal accuracy.

Step 2: Mounting

  • Assembly: The Radar Detector ships as a complete assembly.
  • Height Advantage: Mount the assembly as high on the post as possible using the articulating bracket.
  • Materials: Use bolts or bands (banding material not supplied, adapter brackets included in the 012-SA300-0KIT ship kit).

Step 3: Aiming

  • Positioning: Aim the radar face flat and level to traffic using the two-axis bracket.
  • Refined Detection: For specific lanes or entry points, aim the radar downward and toward the middle of the street.
  • Detection Range: Imagine a 30⁰ cone emitting from the radar face; adjust height and angle accordingly.

Step 4: Connection

  • Wiring Harness: The radar has 4 color-coded wires enclosed in a UV-rated outdoor cable harness.
  • Connection: Connect according to the wiring diagram that applies to this configuration.
  • Power On: Connect the radar before powering on the system to unlock configuration settings.
  • Cable Management: Create a drip loop in the cable and trim or stow excess cabling after testing.

Step 5: Refining Aim

  • Indicators: The radar will flash green (power) and red (detection) LEDs once connected and powered on.
  • Adjustment: Use the red LED to refine the radar's aim as you adjust it across its axes.

Step 6: Securing

  • Tighten Fasteners: Ensure all fasteners are sufficiently tightened to maintain aiming accuracy even in inclement weather.

Images


Conclusion
By following these steps, you can effectively install and configure the TraffiCalm Smart Radar Detector to enhance your flashing sign system's performance, ensuring it only activates when a vehicle is detected, thus reducing power consumption and increasing the sign's impact.

    • Related Articles

    • Nut Plate Installation for TraffiCalm Solar Panels

      Summary: This visual reference provides a straightforward overview of how to correctly install nut plates for mounting TraffiCalm solar panels on traffic infrastructure. The images guide you through the essential steps to ensure that the nut plates ...

    • How To Install: Square Top of Pole Mount (M75-SQTOP-0000)

      Overview The M75-SQTOP-0000 is specifically designed for mounting TraffiCalm's Flashing Sign systems atop square poles. This mount facilitates optimal orientation of the solar panels—specifically pointing south—to maximize solar efficiency crucial ...

    • Guide to Using Wi-Fi and Control FOBs for TraffiCalm Sign Systems

      Guide to Using Wi-Fi and Control FOBs for TraffiCalm Flashing Sign Systems Note: This guide details the functions and usage of different FOB types for TraffiCalm Flashing Sign Systems, including Wi-Fi Reset, Toggle, and Activation FOBs. Each section ...