S-Box Controller Setup Guide

S-Box Controller Setup Guide


Overview
The S-Box series controllers, including the CTLS and CLBS models, are designed for robustness and the ability to handle large-capacity batteries and solar panel units. These units are ideal for more complex integrations or to withstand extreme conditions. They provide increased battery capacity and are built for demanding requirements, making them suitable for side-of-pole mounting with easy access and integration.

Applicable Models

  • M75-SA300-CTLS
  • M75-SA300-CLBS
  • M75-DE0TS-CTLS

Installation Guide

Planning the Installation

When planning the installation of the S-Box controller or collaborator, consider the following:

  • Cabling Route: All peripheral devices’ cabling should route into the back of the cabinet, often from within the pole.
  • Solar Panel Cable: The solar panel cable routes into this cabinet.
  • Antenna Placement: The external antenna needs a clear view to the next device’s antenna, and ideally, a clear view to the controller.

Mounting the Enclosure

The enclosure’s mounting bracket offers several mounting options:

  • Threaded Holes: Features 3/8” threaded holes placed on 1” spacing for direct application to a Telespar style pole.
  • Banding: To utilize banding, the bracket must be turned 90º from the orientation shown in the provided instructions.

  • Height: Mount the box out of reach to deter vandalism.
  • Visibility: Ideally, mount the box behind the sign to obscure its visibility to approaching drivers. Keep in mind that cable runs will limit where components can be located.

Inside the Cabinet

  • Batteries and I/O Tray: You will need to place two 12V batteries and the I/O tray inside the cabinet. Detailed instructions for this process are included in a separate manual provided with the device.
  • I/O Panel: Accompanying the battery is the I/O panel with four 4-pin connectors and a blade fuse attached. All connections from external devices will terminate at these connectors.

Connections

  • Connections from external devices will terminate at the I/O panel’s connectors. For detailed instructions on making these connections, refer to the Wiring Diagrams available in our support center.

Additional Resources

For more detailed instructions and maintenance information, refer to the following resources:

Conclusion
By following this guide, you will ensure a successful installation of your S-Box controller or collaborator, providing reliable and robust operation under demanding conditions.

    • Related Articles

    • E-Box Controller Setup Guide

      Overview The "E-Box" series controllers, including the CTLE and CTLA models, are designed for convenient side-of-pole mounting, providing easy access and integration. These fiberglass enclosures streamline the installation process and offer robust ...

    • Power Maintenance Guide - CTLS & CLBS

      Overview This guide is designed to help you identify and resolve power-related issues in your TraffiCalm Flashing Sign System. It includes steps for checking system fuses, testing battery voltages, and ensuring proper solar panel connections. ...

    • CTL2/CTL3 Controller Setup Guide

      Overview This guide provides step-by-step instructions for installing CTL2 and CTL3 models, which are Solar Engine-Integrated Controllers or Collaborators. These systems are designed for easy mounting to poles or existing infrastructure, featuring an ...

    • How to Convert and Configure a Controller as a Collaborator

      Overview This guide details the process of converting a controller into a collaborator within specific systems. Follow these steps to enable your controller to work in harmony with other system components, enhancing overall functionality and system ...

    • How to Add a key switch to an existing Controller or Collaborator

      Overview This guide details the process of adding a key switch to a controller or collaborator within specific systems. Follow these steps to enable your controller to work in harmony with other system components, enhancing overall functionality and ...