Trafficalm Flashing Sign Setup

Setup Video Tutorials for TraffiCalm Flashing Sign Systems

Push 2 Cross Setup 

Factory Reset Procedure of Trafficalm Flashing Sign System

Chevron Knockdown to replace a Collaborator

Chevron System Setup

High Water Detection Setup

All Flash Setup

All Flash SCHEDULING

    • Related Articles

    • Flashing Sign Systems Quickstart Guide

      The TraffiCalm team would like to express our deep appreciation for your purchase and support. Our products represent a huge leap forward in road safety technology, but it was by your choice to use them that makes you our Heroes! Every TraffiCalm ...

    • Troubleshooting and Technical Guide for TraffiCalm Flashing Sign Systems

      Flashing Sign Systems Troubleshooting - This article is intended to provide you with guided troubleshooting tactics for resolving issues with your flashing sign system. This system attributes to a wide variety of applications, so providing exhaustive ...

    • How to Identify Generation and Firmware for Trafficalm Flashing Sign Systems

      Overview This guide helps technical support staff and customers accurately identify the generation and firmware version of CTL2/CTL3 and E-Box style controllers and collaborators in Trafficalm Flashing Sign systems. CTL2/CTL3 Controllers CTL2/CTL3 ...

    • How to Connect to a TraffiCalm Flashing Sign System via WiFi

      How to Connect to a TraffiCalm Flashing Sign System via WiFi Overview Connecting your device to a TraffiCalm Flashing Sign System via WiFi is essential for system setup and management. This guide provides step-by-step instructions to ensure a ...

    • Flashing Sign Systems Installation Guide

      This guide is intended to guide a qualified technician through the process of installing a complete Flashing Sign System. NOTE Many aspects of this guide may or may not apply to the hardware selected for you project. Introduction - System Discussion ...