Troubleshooting and Technical Guide for TraffiCalm Flashing Sign Systems
Flashing Sign Systems Troubleshooting - This article is intended to provide you with guided troubleshooting tactics for resolving issues with your flashing sign system. This system attributes to a wide variety of applications, so providing exhaustive information specific to your issue is challenging. Our expert team of Customer Success Managers has developed the content in this article from thousands of successfully resolved conversations from across the world. The content here is intended to enrich the troubleshooting you've already attempted, and lead you to the next stages.
Use the navigation at right or the search bar to jump to specifically applicable sections of this article.
Introduction -System Orientation
Model Specific Details
Solar Engines- Battery, Solar, and AC Power Test, and Component Replacement
Installing New Batteries in Solar Engines
LED Status Indicators - Power
AC Power Checking Details
Test Points
Installing Replacement Material in Gen 3 and 4 "E" Boxes
Installing Replacement Material in All "S" Boxes
Testing to Component Failure
Peripheral Troubleshooting- Buttons, LED Signs, Radars, ETC.
Peripheral Wiring Diagrams
Identify Your Generation of Hardware
Basic Troubleshooting Skills
Troubleshooting Issue and Resolve Matrix
Power Check
Checking Fuses
Advanced Techniques
Applying Direct Power
Radar Testing
Connect With Us
Related Articles
Flashing Sign Systems Troubleshooting Guide
Trafficalm Flashing sign system are used in variety of ways. Push 2 Cross, Curve Warning Systems, Stop Rings, Conflict Intersections, Highwater Warning, or School Zone Beacon Flashers are just a few ways the systems can be setup to operate. ...Flashing Sign Systems Quickstart Guide
System Overview TraffiCalm Flashing Sign systems are available in multiple configurations to suit diverse project requirements. Typically, systems include a Flash Controller (also known as a solar engine), a Sign Ring, and an input device such as a ...How to Identify Generation and Firmware for Trafficalm Flashing Sign Systems
Overview This guide helps technical support staff and customers accurately identify the generation and firmware version of CTL2/CTL3 and E-Box style controllers and collaborators in Trafficalm Flashing Sign systems. Generation 1 and 2 system are very ...Flashing Sign Systems Installation Guide
This guide is intended to guide a qualified technician through the process of installing a complete Flashing Sign System. NOTE Many aspects of this guide may or may not apply to the hardware selected for you project. Introduction - System Discussion ...Flashing Sign System - All Flash Setup Guide
Guide to Setting Up an All Flash System Using TC Connect Overview "All Flash" is the term within TC Connect for configuring any flashing LED signs that are not part of other intelligent solution systems, such as Push 2 Cross, Chevron, or High Water. ...